• banner2

Threaded/Welded Forged Steel Gate Valve

Short Description:


Product Detail

Product Tags

Products Design Features

Stronger, Leakproof Body-bonnet Joint, Fully Encased Spiral Wound Gasket
The design of the gasketed joint is critical. Its compression is better controlled in a fully enclosed cavity. Also, the possibility of unwinding of the SS spiral metal is eliminated.

Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in oil industry chemical industry fossil-fired power plants.

Applicable Standards:
BASIC DESIGN: API 602 Face to Face and End to End
DIMENSIONS OF VALVES: ANSI B16.10
FLANGED END: ANSI B16.5
VALVE TEST AND INSPECTION: API598

Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in oil industry chemical industry fossil-fired power plants.

The main structure features include:
1.Both design and manufacture are carried out strictly following GB/T12234AP600and AP1602. The products feature a reasonable structure. reliable seal, good performance and nice modeling.
2.Co hard alloy welded sealing surface, which is wearing resistant erosion proof, abrasion proof and long-lived.
3.The surface and the adjusting media of the valve shaft are nitrogenized so that it is erosion and abrasion resistant.
4.PN≥15.0MPa(Class900), the middle cavity usea a self-tightening sealing structure to have the sealing performance reinforced along with the pressure rise so as to ensure the sealing performance.
5.There is no backward sealing structure in the valve, so the sealing id reliable
6.The material of the filling and the flange size can be chosen and matched according to the applications and the requirements of the use's. That can satisfies all kinds of working requirements.

Main Parameter Of The Products

Serial models  (HsPs)Z11H(HsPs)Z11Y(Ps)Z41H(Ps)Z41Y(Ps)Z441H(Ps)Z441Y(Ps)Z541H(Ps)Z541Y(Ps)Z941H(Ps)Z941Y
Pressure grade range PN1.6-42.0MPa(Class150-2500)
Drift diameter range DN15-1000mm(NPS1-40)
Driving manner Hand wheel driving Gear driving and electric driving 
Scope of application Class150-300(PN1.6-4.0) Class400-600(PN6.4-10.0) Class900-2500(PN15.0-42.0)  NPS2-40(DN50-1000mm) 

NPS1/2-24(DN15-600mm)

NPS1/2-12(DN15~300mm)

NPS1/2-10(DN15~250mm)

Products Performance Specification

svavqw

Technical Specification

Structural formation Bolt-jointed bonnet outside stem yoke structure
Driving manner Hand-operated
Design standard API602.BS5352
Thread ends ASME B1.20.1
Socket welded ends ASME B16.11
Test & inspection API598 BS6755

Major Parts Material Form

No. Part name Material
1 Body ASTM A105

ASTMA182-F11F22F5F9

ASTMA182-F304F316F321F304LF316L

2 Seat A8TM A105

ASTMA182-F11F22.F5.F9

ASTM A182-F304F316F321F304LF316L

3 Wedge ASTM A105

ASTMA182-F11F22.F5F9

ASTMA182-F304F316F321F304LF316L

4 Stem ASTMA182 F6aASTMA182F22.F11

ASTMA182-F304F316 F321F304LF316L

5 Bonnet ASTM A105

ASTMA182-F11F22F5F9

ASTMA182-F304F316F321F304LF316L

6 Packing Graphite
7 Packing press-sleeve ASTMA182 F6aASTMA182F22F11

ASTMA182-F304F316F321F304LF316L

8 Packing gland ASTMA216-WCBASTMA217-WC6WCC5C12 ASTMA351-CF8CFBMCF8CCF3CF3M
9 Valve stem nut Copper alloy
10 Hand wheel ASTMA47-32510 ASTMA53660-40-18

  • Previous:
  • Next:

  • Leave Your Message

    Related products

    • Bolted Bonnet OS&Y Gate Valve

      Bolted Bonnet OS&Y Gate Valve

      Products Design Features Products design features • Stellited seating surface • Low emission control • Flexible wedge • Full guiding • Absolute bonnet joint leak proof • Optional by-pass design, Y Style Globe Valve, Check Valve. Products Range Size: 2”-24” Rating: ANSI 600lb-2500lb Body material: Carbon steel , Chromium Moly Alloy steel Trim: Per API 600 Operation: Handwheel, Gear, Motor actuator Flanged ends cast steel gate valve are used to ...

    • Threaded/Welded Forged Steel Gate Valve

      Threaded/Welded Forged Steel Gate Valve

      Products Design Features The main structure features include: 1.Both design and manufacture are carried out strictly following GB/T12234AP600and AP1602. The products feature a reasonable structure. reliable seal, good performance and nice modeling. 2.Co hard alloy welded sealing surface, which is wearing resistant erosion proof, abrasion proof and long-lived. 3.The surface and the adjusting media of the valve shaft are nitrogenized so that it ...

    • Flat Gate Valve Parallel Slide valve

      Flat Gate Valve Parallel Slide valve

      Introduction Through conduit valves are widely used for oil and gas pipeline service. This type of valve has such function that, when fully opened, media passage capability superior to valves in use for general secondary process line, it can also be capable for pig ball Cleaning service. BVMC through conduit gate valves are available in Slab Gate and Expanding Gate design and both are fully comply with API 6D standard. ...

    • Flanged Forged Steel Gate Valve

      Flanged Forged Steel Gate Valve

      Products Design Features Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in oil industry chemical industry fossil-fired power plants. The main structure features include: 1.Both design and manufacture are carried out strictly following GB/T12234AP600and AP1602. The products feature a reasonable structure. reliable seal, good perform...

    • Low temperature Gate Valve

      Low temperature Gate Valve

      Products Design Features Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in oil industry chemical industry fossil-fired power plants. The main structure features include: 1.Both design and manufacture are carried out strictly following GB/T12234AP600and AP1602. The products feature a reasonable structure. reliable seal, good perform...

    • High Temperature and High Pressure Electric Power Station Gate Valve

      High Temperature and High Pressure Electric Pow...

      Products Design Features Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in oil industry chemical industry fossil-fired power plants. The main structure features include: 1.Both design and manufacture are carried out strictly following GB/T12234AP600and AP1602. The products feature a reasonable structure. reliable seal, good perform...

    Leave Your Message